A30™ HARDWARE GUIDE
26
5
5.2 GIGAETHERNET CONNECTOR
An M12 8-pin female connector is provided for the on-board GigaEthernet connection**. This
interface is 1000BASE-T (also known as IEEE 802.3ab) compliant. See section 5.5 for
connection details.
Figure 28 - M12 8-Pin Female GigaEthernet Network Connector
M12 8-Pin GigaEthernet Network Connector pinout
Pin
Name
Function
1
DB-
Channel B bi-directional data (negative pin)
2
DD+
Channel D bi-directional data (positive pin)
3
DD-
Channel D bi-directional data (negative pin)
4
DA-
Channel A bi-directional data (negative pin)
5
DC+
Channel C bi-directional data (positive pin)
6
DA+
Channel A bi-directional data (positive pin)
7
DB+
Channel B bi-directional data (positive pin)
8
DC-
Channel C bi-directional data (negative pin)
(**) Due to the high speed signals, it is strongly suggested that you use CAT5e or CAT6 cables.
5.3 POWER SUPPLY
Power is supplied to the camera through the pins provided on the M16 19-pin connector (see
The camera cannot source power through this connector
.
CAMERA
A
L
Vdc
GND
K
SHIELD
USER INTERFACE
CHASSIS
V- (Ground)
V+ (10 - 30 Vdc)
Earth Ground
Earth Ground
Chassis
Figure 29 - Power Supply Connection
The allowed supply voltage range for the camera is 10 to 30 Vdc.
Summary of Contents for A30
