8.
Device will show message “System data has been deleted.” Press any key to
continue.
9.
The device will now power off automatically.
10. To reinitialize your Sentry K300 device, see Setting Up The Sentry K300 After Zeroize
below.
Setting Up The Sentry K300 After Zeroize
Setting up your device after a Zeroize command has been initiated is much like setting up a new
drive.
1.
Power on the device by pressing the
Power
button.
2.
Device will ask “Initialize the device?” Select
Yes
, then press
Enter
.
3.
Device will ask “All saved data will be deleted. Continue?” Select
Yes
, then press
Enter
.
4.
Device will ask “Warning! Verify to Continue?” Select
Yes
, then press
Enter
.
5.
The device will ask you to plug it in by showing an image of a plugged in device on the
screen.
Warning:
Do not power off or unplug the device at this step. The device will move to
the next step automatically when it’s finished initializing.
6.
Device will show the message “The initialized password is ‘1234567’”. Unplug the
device and press any key to continue.
7.
Device will show the message “You must reformat the drive.” Press any key to
continue.
8.
The device will power off and back on automatically. The password entry screen will
be displayed when it is finished restarting. Enter the default password of
1234567
.
9.
Format the Sentry K300 on your system and it will then be ready for use. See
Formatting The Sentry K300 for more information.
Screensaver Mode
The device is programmed to turn off the screen after 10 seconds of either no use or the
waiting/connection screen. This prevents screen burn-in. To turn the screen back on, press any
key. This setting cannot be turned off.
Inactivity Mode
The device is programmed to power off after 60 seconds of inactivity. To power back on, press
the
Power
button. This setting cannot be turned off.
Note:
The device will not power off while connected to the computer. The screen may turn off
after 10 seconds to prevent screen burn-in, however, you can revive it by pressing any key.
Administrator Menu Screen Options
●
Change Password:
Change the administrator password.
