Menu Features
Device Information
To see information about the device without logging into it, press and hold the
Power
button for
3 seconds. Before entering the password, press
Enter
. Use the
Up
and
Down
arrow keys to
see different information.
Device information shown:
● Device Name
● Firmware Version
● Capacity
● Alpha-numeric Serial Number
● QR Code Serial Number
● Certificated Logo
● Patent
Read-Only Mode
This option protects the contents of the drive by not allowing users to alter or add files. This
feature can be enabled in two different capacities.
●
All users and administrators:
Can be enabled by the administrator and user in the
Screen Selection Menu. Enabling this feature here will force the device to launch in
Read-Only Mode until the device is locked. This is helpful when using unknown
computers.
●
Users only:
Can be enabled by the administrator in the Administrator Menu. Enabling
this feature here will force the device to launch in Read-Only Mode for
Users only
until
the feature is turned off. For more information on finding the Administrator Menu, see
Administrator Menu Screen Options.
Boot Mode
After authentication, selecting Boot Mode from the Selection Screen allows you to boot an
operating system, such as Windows To Go, from the Sentry K300. In this mode, the device can
lose momentary connection with the computer and remain unlocked. Only select Boot Mode
when planning to run an operating system from the Sentry K300. For a more secure connection,
it is recommended to use
Connect Mode
, unless Boot Mode is specifically needed.
If Boot Mode is selected and the device is connected to an operating system like a normal flash
drive, it will automatically be remounted after safely ejecting. To lock your device, physically
remove it from the computer.
To use boot mode:
1.
Install an operating system on the drive. During installation of an operating system to
the Sentry K300, the drive does not need to be in Boot Mode. For installation
instructions, please refer to the portable operating system’s guide.