DSD-080 User Manual V-1.0
3
•
Electrical equipment should be installed only by qualified
specialist. No responsibility is assured by the manufacturer or any
of its subsidiaries for any consequences resulting from the non-
compliance to these instructions.
•
Check the unit for cracks and damages due to transportation. Do
not install damaged equipment.
•
Do not open the unit. There is no serviceable parts inside.
•
Fuses must be connected to phase voltage inputs, in close
proximity of the unit.
•
Fuses must be of fast type (FF) with a maximum rating of 6A.
•
Disconnect all power before working on equipment.
•
When the unit is connected to the network do not touch terminals.
•
Any electrical parameter applied to the device must be in the range
specified in the user manual.
•
Do not try to clean the device with solvent or the like. Only clean
with a dry cloth.
•
Verify correct terminal connections before applying power.
•
Designed for vertical wall mounting.
SAFETY NOTICE
Failure to follow below instructions will
result in death or serious injury
