Three buttons on the front panel provide
access to configuration and measurement
screens.
BUTTON
FUNCTION
Previous screen
or
Decrease related value
(configuration mode)
Next screen
or
Increase related value
(configuration mode)
Changes voltage and
current channels for
scopemeter display
harmonic display
digital harmonic
display
Available channels:
U12-U23-U31
V1-V2-V3
I1-I2-I3
HELD PRESSED FOR 3
SEC:
enable/disable auto-scroll
function
HELD PRESSED TOGETHER
FOR 3 SEC:
Clears visual warning
condition if any.
If no warning
condition, enters
configuration mode.
The unit offers the possibility of automatically
scanning of all display screens.
In order to enable
auto-scroll function
hold the SET button
pressed for 3
seconds.
In order to disable auto-
scroll function hold the
SET button pressed for
3 seconds.
When the auto-scroll is enabled, the unit will
switch to the next screen every 5 seconds.
In order to reset
visual warnings, hold
both MENU buttons
pressed for 3
seconds.
If no fault conditions
exists this will enable
the configuration
menu.
RESETTING VISUAL WARNINGS
SETTING AUTO-SCROLL MODE
PUSHBUTTON FUNCTIONS
