Chapter 3
Page : 32
AWARD BIOS Setup
3
INTEGRATED PERIPHERALS SETUP
The
INTEGRATED PERIPHERALS
is used to control the values of the
I/O chipset registers. These registers control the mode of HDD type and
I/O address port.
Run the Integrated Peripherals as follows:
1. Choose
INTEGRATED PERIPHERALS
from the Main Menu and a
screen with a list of items appears.
Note:
If you don't use the Onboard IDE connector, than use On-card
(PCI or ISA card ) IDE connector, you will set Onboard Primary
PCI IDE : Disabled and Onbard Secondary PCI IDE : Disabled from
CHIPSETFEATURES SETUP UTILITY.
The Onboard PCI IDE cable should be equal to or less than 18
inches (45cm).
IDE HDD Block Mode:
The default value is Enabled.
Enabled : Enabled IDE HDD Block Mode. The HDD transfer rate is
better than Disable.
Disabled : Disable IDE HDD Block Mode.
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
IDE HDD Block Mode
: Enabled
UART Mode Select
: Normal
IDE Primary Master PIO
: Auto
IDE Primary Slave PIO
: Auto
Onboard Parallel Por
t
:
378/IRQ7
IDE Secondary Master PIO : Auto
Parallel Port Mode
: SPP
IDE Secondary Slave PIO
: Auto
IDE Primary Master UDMA : Auto
IDE Primary Slave UDMA
: Auto
IDE Secondary Master UDMA
: Auto
IDE Secondary Slave UDMA
: Auto
On-Chip Primary PCI IDE
: Enabled
On-Chip Secondary PCI IDE : Enabled
USB Keyboard Support
: Disabled
Init AGP Display First
: Disabled
KBC input clock
: 8 MHz
Onboard FDC Controller
: Enabled
ESC : Quit
←→↑↓
←→↑↓
←→↑↓
←→↑↓
←→↑↓
:Select Item
Onboard Serial Port 1
:
3F8/IRQ4
F1 : Help PU/PD/+/- : Modify
Onboard Serial Port 2
:
2F8/IRQ3
F5 : Old Values (Shift)F2 : Color
ESC : Quit
←→↑↓
←→↑↓
←→↑↓
←→↑↓
←→↑↓
:Select Item
