Page : 31
Chapter 3
AWARD BIOS Setup
3
2. Explained below:
PNP OS Installed
If your operating system is a Plug-and-Play one, such as Windows
NT, Windows 95, select Yes. The options are : No (Default), Yes.
Resource Controlled By
Manual : The field defines that the PNP Card’s resource is controlled
by manual. You can set which IRQ-X and DMA-X assigned
to PCI/ISA PNP or Legacy ISA cards.
Auto
: If your ISA card and PCI card are all PNP cards. To set this
field Auto.
The BIOS will be assigned the interrupt resource
automatically.
Reset Configuration Data
Disabled : Normal Setting
Enabled
: If you had plugged some Legacy cards in the system and
there were records into ESCD (Extended System
Configuration Data). You can set this field to Enabled and
to clear ESCD one time . When some Legacy cards were
removed.
4. After you have finished with the PCI Slot Configuration program,
press the <
ESC
> key and then follow screen instructions to save or
disregard your settings.
LOAD SETUP DEFAULTS
This Main Menu item loads the default system values.
These settings
are recommended for optimum performance
. If the CMOS is corrupted
when enter BIOS setup utility you must load setup default again
.
Choose this item and the following message appears:
Load SETUP Defaults (Y/N)? Y
To use the Setup defaults, change the prompt to and press
Y
and press
<Enter>.
