DataDirect Networks S2A9550, User Manual

Page: 57 / 118

M a n a g i n g t h e S 2 A 9 5 5 0
D a t a D i r e c t N e t w o r k s S 2 A 9 5 5 0 U s e r G u i d e
45
are 0 to 32768. However the results may be unpredictable if the port number chosen is already in use
(on this unit) by either the TELNET or GUI facilities. Default port number is 514.
NOTE : The
S2A9550
sends syslog messages via the local7 (23) facility.
Please refer to Section 3.9 for information on how to set up the Telnet and SNMP functionality on
your host computer.
3.2.4.3 API Server Connections
To enable/disable the API server capability, use the command:
NETWORK API_SERVER=ON|OFF.
The DataDirect Networks Management Tool relies on an active and enabled API Server for its
communications with the system. The system must be restarted before the changes will take effect.
NOTE : To affect the API Server connection availability only temporarily during the current power-
cycle, refer to the API command (see Section 3.8.2).
To specify the API Server port number for the current S2A9550, use the command:
NETWORK
API_PORT=<port number>
. The system must be restarted before the changes will take effect. Valid
ports are 0 to 32768. The results may be unpredictable if the port number chosen is already in use (on
this unit) by either the TELNET or SYSLOG facilities. The default port number is 8008.
3.2.4.4 Displaying and Editing the Routing Table
The
ROUTE
command displays the current routing table of the system
(Figure 3-20)
and allows the
administrator to change it. The routing table describes how the S2A9550 can communicate with the
hosts on other networks.
To add gateways to the routing table, use the command:
ROUTE ADD=<aaa.bbb.ccc.ddd>
GATEWAY=<aaa.bbb.ccc.ddd>
. Up to 6 permanent routes can be added to the routing tables. For
example, to indicate that the machine with Internet address 91.0.0.3 is the gateway to the destination
network 90.0.0.0, enter command:
ROUTE ADD=90.0.0.0 GATEWAY=91.0.0.3
To delete gateways from the routing table, use the command:
ROUTE DEL=<aaa.bbb.ccc.ddd>
GATEWAY=<aaa.bbb.ccc.ddd>
destination
Gateway 172.16.0.254
Permanent Routing Table:
Figure 3-20 Current S2A Routing Table
S2A [1]: route
gateway
----------------------------
0.0.0.0
172.16.0.254
----------------------------
ROUTE NET TABLE
destination gateway
--------------------------------------------------------------------
0.0.0.0
172.16.0.254
--------------------------------------------------------------------
Current Routing Tables:
flags
3
Refcnt
0
Use
46569
Interface
fei0
172.16.0.0 172.16.0.1 101 0 3 fei0
192.168.0.0 172.13.0.254 3 0 1 fei0
ROUTE HOST TABLE
-------------------------------------------------------------------
-------------------------------------------------------------------
destination gateway flags Refcnt Use Interface
127.0.0.1 127.0.0.1 5
1
2 lo0
========================
=========================