DM4380 – Installation Guide
Hardware DESCRIPTION
204.4336.00 - October/2019
12
following figures. The pin assignment of the RJ45 connector and its match with the DB9
connector is described in
table 4
.
Figure 3 – Console Cable
Figure 4 - Console interface connector pin assignment
RJ45 Male
DB9
Female
Function
DM4380 Input/output
1
-
Reserved
-
2
-
Reserved
-
3
2
RS232_TX
Output
4
5
DGND
Ground
5
5
DGND
Ground
6
3
RS232_RX
Input
7
-
Reserved
-
8
-
Reserved
-
Table 3 - Console interface connector pin assignment
3.5
USB
I
NTERFACE
C
ONSOLE
For management via USB, the DM4380 has a USB console port accessible via Mini-USB
cable (not included) on rear panel.
The driver for use of this interface in Windows can be found
in
http://www.datacom.com.br/support
3.6
USB
I
NTERFACE
H
OST
The product provides a type A USB interface host on the rear panel that can operate
according to specification 2.0. There is no need to use this interface during the switch’s
installation process. Contact
for more information on using this
interface.
3.7
I
NTERFACE
M
ANAGEMENT
E
THERNET
(MGMT)
The DM4380 has a Gigabit Ethernet interface used for local or remote management of
the switch. For details on how to use it, see the chapter
This
interface has two status LEDs whose behavior is described
