Datacom Systems SS series SPAN, User Manual

Page: 13 / 44

Datacom Systems Inc
SPAN and Multi-Link Aggregators/Regenerators • USERguide
13
Step 3. Connect the other primary network cables to the primary SINGLE stream ™ S-100 RJ45 port
NETWORK B
connector. The
NETWORK-B LINK
LED illuminates indicating link has been
established between the NETWORK B connector and primary NETWORK B device.
!!!:
The network is bidirectional Tx/Rx path sensitive and correct connection is indicated by
simultaneously illuminated
NETWORK-A and NETWORK-B “ LINK ” LEDs . W hen con-
necting the second network device causes the first LINK LED to go out and both LINK
LED s are NOT illuminated, the network connection is backwards. Reverse NETWORK A
and NETWORK B connections and link will be established.
The
NETWORK-A
and
NETWORK-B ACT LEDs
illuminate as data is passed between the
primary NETWORK A and NETWORK B devices.
Step 4. Connect the redundant network cables to the redundant SS-100 RJ45 port
NETWORK A
connector. The
NETWORK-A LINK
LED illuminates indicating link has been established
between the NETWORK A connector and redundant NETWORK A device.
NOTE: Let the “LINK” LED be your guide. If you are properly connected, NETWORK-A and
NETWORK-B “ LINK ” LEDs remain illuminated simultaneously.
Step 5. Connect the other redundant network cables to the redundant SS-100 RJ45 port
NET-
WORK B
connector. The
NETWORK-B LINK
LED illuminates indicating link has been
established between the NETWORK B connector and redundant NETWORK B device.
!!!: The network is bidirectional Tx/Rx path sensitive and correct connection is indicated by
simultaneously illuminated
NETWORK-A and NETWORK-B “ LINK ” LEDs . W hen con-
necting the second network device causes the first
LINK LED
to go out and both
LINK
LED s are NOT illuminated, the network connection is backwards. Reverse NETWORK A
and NETWORK B connections and link will be established.
The
NETWORK-A
and
NETWORK-B ACT LEDs
illuminate as data is passed between the
redundant NETWORK A and NETWORK B devices.
Step 6. Connect the primary
TAP 1
port connector into the SS-200 RJ45 port
NETWORK B
con-
nector. The
NETWORK-B LINK
LED illuminates indicating link has been established
between the NETWORK B connector and the primary SINGLE stream ™ SS-100 .
Step 7. Connect the redundant
TAP 1
port connector into the SS-200 RJ45 port
NETWORK A
connector. The
NETWORK-A LINK
LED illuminates indicating link has been established
between the NETWORK A connector and the redundant SINGLE stream ™ SS-100 .
Step 8. Connect one SS-200 tap cable from the TAP 1 port connector into the IDS monitoring
NIC. The
TAP 1 LINK
LED illuminates indicating link has been established between the
SINGLE stream ™ SS-200 TAP 1 connector and IDS monitoring NIC. The
SINGLE stream ™ SS-200
TAP 1 ACT
LED illuminates as data is passed to the TAP 1 IDS
.Step 9. Connect the other SS-200 tap cable from the
TAP 2
port connector into the analyzer
monitoring NIC. The
TAP 2 LINK
LED illuminates indicating link has been established
between the TAP 2 connector and analyzer monitoring NIC. The SINGLE stream ™ SS-
200
TAP 2 ACT
LED illuminates as data is passed to the TAP 2 analyzer.