Spyder3 Help Index
Welcome Screen:
An overview of the application.
Before You Begin:
Preparatory Steps.
New Display:
Define whether a new display is to be calibrated.
Select Display:
Choose which display to work with.
Current Settings:
Shows current choice of calibration settings.
Select Gamma:
Choose or define a gamma selection.
Select Response Curve:
Select a non-Gamma curve.
Create Response Curve:
Define your own custom response curve.
Select White Point:
Choose a whitepoint value or create your own.
Display Type:
Select type of device to calibrate (first time only).
Select Target:
Choice from predifined calibration targets.
Select Ambient Light Compensation:
Decide if you wish to correct for ambient light.
Ambient Light Analysis:
identify and adjust your ambient light level.
Select Luminance Mode:
Decide if you wish to target specific brightness endpoints.
Measured Luminance Mode:
Uses your Spyder to define black and white.
Specify Luminance Values:
Allows user to enter values for black and white.
Identify Controls:
Designate what general controls your display offers (part of the New
Display Assistant).
Identify Color Controls:
Designate what color controls your display offers (part of the
New Display Assistant).
Adjust RGB Gain Controls:
Adjust the color of white with RGB Gain Controls (an
advanced option activated in Preferences).
Adjust Kelvin Slider:
Adjust the color of white with a color temperature Slider.
Adjust Kelvin Preset:
Adjust the color of white with a color temperature Preset.
Reset Factory Defaults:
Info on resetting your display to factory default settings.
Set Black Luminance:
Adjusting Black on displays that have a black control.
Set White Luminance:
Adjusting White Luminance and related controls.
