Datacolor Conditioner Operation Manual / DCCOPMN_RP1 / Rev 3.0 / 7th August 07
page 50 of 51
Legend:
1. The temperature data were determined by a 9-point measurement in a distance of 135 mm to the light
cassettes below the fluorescent tubes at 21 °C / 65 % RH
2. Upon door opening or water exchange in humidity cylinder > 1,5% r.H, recovery time approx. 20 min.
3. Use this value for dimensioning air condition systems.
All technical data are specified for units with standard equipment at an ambient temperature of +21 °C /
65 %RH and a mains voltage fluctuation of ±10. The temperature data are determined in accordance to
DIN 12880, part 2, respecting the recommended wall clearances of 10 % of the height, width and depth of
the inner chamber.
All indications are average values, typical for units produced in series. We reserve the right to
alter technical specifications at all times.
If the chamber is fully loaded, the specified heating up and cooling down times may vary
according to the load.
Bringing in a humidity source to the inner chamber affects the minimal humidity range.
13.6 Equipment
To operate the sample conditioning cabinet, use only original Datacolor accessories or
accessories of third-party suppliers authorized by Datacolor. The user is responsible for any
risk when using unauthorized accessories.
Microprocessor controller with 2-channel technology for temperature and humidity
Electronic safety controller (temperature safety device) class 3.1 acc. to DIN 12880
Only CONDITIONER
™
with lighting unit:
Temperature limiter 66 °C, class 1 acc. to DIN 12880
Only CONDITIONER
™
without lighting unit:
Temperature fuse 110 °C, class 1 acc. to DIN 12880
Inner glass door
DCT
®
refrigerating system with refrigerant R134a
Microprocessor controlled humidifying and dehumidifying system
Only CONDITIONER
™
with lighting unit:
2 illumination cassettes, one fix and one flexible
