Datacolor AutoLab SPS Quick-start Manual
AutoLab SPS Quick start manual TFSTARTMANSPS / Rev 2.0 / 1st Jul 2013 / Jeffery Fain
Page 11 of 11
Safety recommendations
•
Before turning on the system, make sure that the system operating voltage agrees with the main
power voltage.
•
If the power cable is damaged, the system must be immediately disconnected from the electric
supply.
•
If there is any reason to believe that it is no longer possible to operate the system without danger,
the system should be immediately disconnected from the electric supply.
•
In carrying out maintenance work, it is essentially to heed the maintenance instruction in
“Maintenance Guideline”.
•
If liquid is split into the electric cabinet, connectors or power terminals of the system, the system
should be immediately disconnected from main power supply.
•
Do not put anything inside the main frame of the system that is not intended for use with the
system
•
If any emergency situation should happen, press the “Emergency Button” on the electric cabinet
panel to stop the system immediately.
