Page 6
Connect the printer to the print
server using a USB cable.
Set up for your card design — choose CP Driver data format (5a) or Open Card data format (5b).
Insert the CP Driver
CD-ROM. Choose
“DIrect Network”
during installation.
Set the print server
IP address or
network name in
the driver’s
Properties:
Ports:Configure
or Properties:
Details: Port
Settings dialog box.
Click “Print Sample
Card” on the Printer
Toolbox.
Compare your card
with the factory
card.
Set up print server on network. See information
with the print server.
Obtain the print server IP address or network name and record it.
IP Address or network name:
Set the Data Format. The printer restarts.
Smart Driver data format:
See the
Data Formatting Guide
for Open Card
commands and card layout menus. (The Open Card
option is required.)
To verify
installation,
send a sample
file from the
computer to
the printer
using the
file2prn utility.
Find both on the Open Card CD-ROM.
Open Card data format:
Connect the print server and network using
an Ethernet cable.
Summary of Contents for CP60
Page 1: ......
