background image

Datacard CE870 User Reference Guide

 

Load the Indent Ribbon

 15

14

Load the Indent Ribbon

1.  Unlock and open the embosser supplies door.
2.  Remove the indent ribbon cartridge and place it on a flat surface with the 

spindles facing up.

4.  Match the supply spool hub with the left side spindle. 
5.  Push the supply spool into the spindle until it clicks securely into place.

IMPORTANT: Do Not Separate

3.  Remove the new indent roll from its package. 

Caution:

 Do not separate the silver take-up spool away from the blue supply 

spool.

6.  Roll up one full turn of indent ribbon on the silver take-up spool.
7.  Roll out a slack length of indent ribbon from the supply spool. 
8.  Route the ribbon around cartridge rollers. Follow the routing diagram on the 

indent cartridge.

Caution:

 Do not twist the ribbon while routing.

9.  Match the keyed pattern of the take-up spool hub with the right side spindle.
10.  Push the take-up spool in until it clicks into place.
11.  Turn the take-up spool clockwise one full turn to eliminate slack.

12.  Replace the indent ribbon cartridge.

i. 

Align the cartridge with the guides inside the embosser.

ii.  Slide the cartridge in until it clicks and stops.

13.  Close and lock the embosser supplies door. 

Summary of Contents for CE870














Reviews: