92
Printer Manager
MS2SSA1—Set the start sentinel adjustment for track 1. The start sentinel is encoded on the
magnetic stripe immediately before the first data character and indicates the beginning of
data. Enter a value from -4 to 4.
MS2StripeEncoderMultiplier—Enter a multiplier value to compensate for encoder variation.
MS2WriteTrack1—Allow magnetic stripe write actions to write to track 1.
MagStripeMS2CustomTrack1
Custom magnetic stripe settings are available for WebAdmin and WebService access levels to set
up custom secondary magnetic stripe options.
Change settings as needed, and then click Set Current to apply changes.
MS2CustomCharHigh1—Specify the numeric value of the highest ASCII character supported
for input data on the track.
MS2CustomCharLength1—Set the number of bits to represent one character of data on the
track, also called bits per character.
Description
Default Value
Current Value
(unit)
Allowed Range
1) MS2CustomCharHigh1
95
95
[0 – 255]
2) MS2CustomCharLength1
6
6
[1 – 8]
3) MS2CustomCharLow1
32
32
[0 – 255]
4) MS2CustomCharMask1
32
32
[0 – 255]
5) MS2CustomCharMax1
76
76
[0 – 255]
6) MS2CustomDensity1
210
210
[0 – 255]
7) MS2CustomEndSentinel1
63
63
[0 – 255]
8) MS2CustomLrc1
EVEN
EVEN
9) MS2CustomParity1
ODD
ODD
10) MS2CustomSdsNulls1
0
0
[0 – 255]
11) MS2CustomSdsRecords1
1
1
[0 – 255]
12) MS2CustomSdsSs1
1
1
[0 – 255]
13) MS2CustomStartSentinel1
37
37
[0 – 255]
