17
Stack More Transmitters to Have More Displays
1. If you would like to broadcast more monitors and speakers, you
can connect another layer of same series Cat5/5e/6 DVI-D + Audio
Transmitter. You can connect additional Transmitter from “VIDEO/
AUDIO IN” port or “RJ-45 VIDEO and RJ-11 AUDIO” ports:
(1) From “VIDEO/AUDIO OUT”: Use one set of standard DVI/Audio cable,
one end connect from the “VIDEO/AUDIO OUT” port of the first layer’
s Transmitter and the other end to “DVI/AUDIO IN” port of the second
layer’s Transmitter. (Refer to following connection )
(2) From “RJ-45 VIDEO and RJ-11 AUDIO”: Similar to the way of
connecting monitor and speaker, you connect DVS-DR and DVS-
AR to the “VIDEO/AUDIO IN” port of the second layer’s Transmitter.
The length for this extension should between 10 to 5 meters and
the total extended length and resolution is about 800x600@0m,
104x768@15m, 180x104@10m. Previous range can be applied
in most of the application, but in some cases it might change. It will be
appropriate to test the capacity of display before installation. (Refer to
following connection )
. To ensure the transmitting quality of DVI-D signal, more than two layer of
stacking is not recommended.
. The transmitter can be , 4, or 8 port model.
DVI Projector Monitor
Projector
PDP
LCD
Diagram of Connecting another Layer of Cat5/5e/6 DVI Transmitter
DVI+Audio cable
DVI
Audio
5 m
10-0 m
Short Range
Receiver
Long Range
Receiver
x 4
x 8
Cat5/5e/6 + Phone cable
Standard DVI, Audio cable
❶
❷
❶
❷
Summary of Contents for DVIE-101R
Page 20: ......
