User Manual
1
(3) Install Short Range Receiver DVS-DR: Please connect DVS-DR to
your DVI monitor’s DVI port directly. The DVI monitor can be PDP,
LCD TV, projector or LCD. The supported DVI resolution and distance
will be similar to regular DVI cable. If you are using long range
receiver DVIE-101R, please refer to next section to install.
(4) Install Long Range Receiver DVIE-101R:
A. Plug power adaptor to DVIE-101R, the orange LED above RJ-45
should turn ON to indicate the power on status. The other LED
should turn off, since there is no input of video signal from “SYSTEM
LINK” port.
B. The “STATUS” led in the front panel will turn ON as the EQ/FOCUS
control switch to the left end and the EQ/FOCUS will stay on AUTO,
this will not function until the receiver received video signal from
“SYSTEM LINK” port.
C. Connect DVI monitor’s DVI cable to the receiver.
DVI Projector Monitor
Projector
PDP
LCD
Connect directly
Short Range Receiver
DVI Projector Monitor
Projector
PDP
LCD
Long Range Receiver
DVI Cable
Summary of Contents for DVIE-101R
Page 20: ......
