2
Auto Start:
Off:
After power up, client will do nothing and wait for the remote or server’s command.
CF card:
After power up, the MP-1000 client will playback according to play list file stored in the
CF card or playback files in A-Z order if no play list file is found.
HTTP URL:
Use CAT’s client setup utility to enter network URL path. After power up, the MP-
1000 client will go to this URL or IP path to download the play list file and execute the action items
listed within the play list file.
Update Client:
is a remote command from the PC/Server to the MP-1000 clients. It will send the current
settings to all the MP-1000 client devices in the selected group. The client devices will reboot after saving
the settings into their EEPROM chips. It should take an MP-1000 upto 2 minutes to go from logging off the
network PC/Server to logging back in again.
Playlist Commander
Local Directory:
Loads media files from local PC’s directory. Alternatively you can select files from a HTTP
Server or Remote FTP Server instead. Once files have been selected and are moved into the right hand client
window, press ‘EZ-Play’ on selected group, server will transfer the selected files to the relevant MP-1000 clients.
Remote HTTP Server:
Type in URL address and filename to be downloaded from the remote HTTP server.
Remote FTP Server:
Allows FTP login and then browse and select files to create a play list.
File Type: MPL
filter check box is for playlist extension (.mpl) only. This feature is to support multiple playlist with
time range settings.
Open:
Open an existing playlist file. This is so the playlist can be checked and amended.
Save:
Save a new playlist file or overwrite an existing one.
>:
move a single selected file to client playlist window on the right.
>>:
move all files to the client playlist window.
Select Group
: Highlight which client group is to execute via “EZ-Play” or “AutoPlaylist” using the relevant
buttons.
EZ-Play:
All media files in the client playlist window will be downloaded to the MP-1000 clients and played back
immediately.
AutoPlay:
Creates an
Autoplaylist.mpl
file under the selected group and enables Autoplay mode.This may not
be effective until the client is rebooted using options under Group Icons or the next time the MP-1000 in that
group is powered on. The User can pre-assign a different playlist file for each group of MP-1000 clients.
