- 4 -
Rear Panel
AUX Audio Output
2 channels XLR Balanced Audio output.
AUX Audio Input
Mix input for background music or daisy chaining AM-100 units together. To daisy chain
units together take the AUDIO OUT pair from the first unit and connect these to the AUX
IN on the second unit.
AUDIO IN
The AM-100 supports four XLR Balanced Audio Input channels.
There are two kinds of switches under
AUDIO IN:
LINE/MIC
switch is used to set the audio as LINE in or MIC in. When LINE in is
selected please also set the
48V ON/OFF
switch to
OFF
in order to prevent burn-out
damage to the circuit.
The
48V ON/OFF
switch is for phantom power. If you want to use MIC in, please set the
LINE/MIC
switch first, and then if using a Condenser microphone turn ON the
48V
ON/OFF
switch. If you wish to use a Dynamic microphone please turn OFF the
48V
ON/OFF
switch.
TALLY
TALLY IN socket. This supplies tally source, control output by A+V.
For more information please see the A+V (Page 5).
DC IN – 4pin XLR
DC in socket connect the supplied 12V 2.5A PSU to this socket. The connection can be
secured by screwing the outer fastening ring of the DC In plug to the socket.
Grounding Terminal
When connecting this unit to any other component, make sure that it is
properly grounded by connecting this terminal to an appropriate point. When
connecting, use the socket and be sure to use wire with a cross-sectional area
of at least 1.0 mm
2
.
