Data Video AM-100 Quick Start Manual Download Page 3

 

- 3 -

Connections & Controls 

Front Panel 

 

 

 

 

Power Switch 

Switches the power On / Off. 
 

 

 

Headphone 

Accepts a stereo mini jack plug for stereo headphones. The headphone volume is 
adjusted by the rotating Head phone volume control. 
 

 

 

Headphone Volume Control 

Controls Headphone volume level.  
Use the Headphone section to accurately monitor any of the sources output. 
 

 

 

Audio LED Meters 

These meters play a vital part in correctly setting the audio levels to avoid clipping or 
other distortion.  
The LED style Audio meters, show the signal strength at the Audio Output. The signal 
they measure is determined by the sources selected by the Audio Bus selectors and the 
levels set by the rotary pots and faders. 
 

Audio Monitor Button 

Use the Headphone section to monitor any of the sources (CH1, CH 2, CH3, CH4) or 
“Master” output. Repeated presses of the Headphone Audio Monitor button will cycle 
through the monitoring choices. In many cases, headphones may be a more useful and 
accurate choice than speakers for audio monitoring. 
 

 

Audio Input Source Level Controls 

This section of the AM-100 controls which audio input channel (CH1~CH4) will be sent 
to the Audio Bus and its associated Fader. 
This row of audio channel selection buttons has LEDs built in to show which input 
channel is active. Level control for each audio input source is via the rotary pots above 
each of the audio channel selection buttons. 
 

A+V 

When this button is engaged or lit, the audio associated with a selected video input 
source automatically follows the video through any transition between the Main and 
Sub Sources. When the A+V button is inactive, the audio sources must be switched 
manually. For more information, see A+V 
 

 

 

AUX Audio Input 

Mix input for background music 
 

 

 

Audio mixer 

These CH1~CH4 Audio Level Faders are for controlling the CH1~CH4 audio mix.  
These faders correspond to the Audio Source selector buttons and control the relative 
volume of each input in the master output as well as the master output level.  

 
MASTER 

This Slider is for controlling the audio level for the Mixed audio output. 

Summary of Contents for AM-100









Reviews: