manualshive.com logo in svg

Data Translation DT9871, User Manual, Page: 40 / 134

Share
Download
Data Translation DT9871 User Manual Download Page 40

Chapter 3

40

Configuring the Device Driver 

Note:

In Windows 7, Windows 8, and Vista, you must have administrator privileges to run 

the Open Layers Control Panel. When you double-click the Open Layers Control Panel icon, 
you may see the Program Compatibility Assistant. If you do, select 

Open the control panel 

using recommended settings

. You may also see a Windows message asking you if you want 

to run the Open Layers Control Panel as a "legacy CPL elevated." If you get this message, 
click 

Yes

.

If you do not get this message and have trouble making changes in the Open Layers Control 
Panel, right click the DTOLCPL.CPL file and select 

Run as administrator

. By default, this file 

is installed in the following location:

Windows 7, Windows 8, and Vista (32-bit)
C:\Windows\System32\Dtolcpl.cpl

Windows 7, Windows 8, and Vista (64-bit)
C:\Windows\SysWOW64\Dtolcpl.cpl

To configure the device driver for a TEMPpoint, VOLTpoint, or MEASURpoint instrument, do 
the following:

1.

If you have not already done so, power up the host computer and all peripherals.

2.

From the Windows Start menu, select 

Settings -> Control Panel

. 

3.

From the Control Panel, double-click 

Open Layers Control Panel

. 

The Data Acquisition Control Panel dialog box appears.

4.

Click the name of the instrument that you want to configure, and then click 

Advanced

.

The Configurable Board Options dialog box appears.

5.

For each channel, set the 

Channel Configuration

 as voltage (the default) or one of the 

supported sensor types for that channel.

Note:

If you wish, you can overwrite these channel input types programmatically using 

your software development environment or application.

6.

Click 

OK

.

7.

If you want to rename the instrument, click

 Edit Name

, enter a new name for the 

instrument, and then click 

OK

. The name is used to identify the instrument in all 

subsequent applications.

8.

Repeat steps 4 to 7 for the other instrument that you want to configure.

9.

When you are finished configuring the instrument, click 

Close

.

Continue with the instructions on wiring in 

Chapter 4

 starting on 

page 41

. 

Summary of Contents for DT9871







































































































































Reviews:

No comments