manualshive.com logo in svg

Data Translation DT3155, User Manual

Share
Download
Data Translation DT3155 User Manual Download Page 9

ix

About this Manual

This manual describes the features of the DT3155 frame grabber 
board and how to use the DT3155 Device Driver with the 
Frame Grabber SDK

 to write an application program.

Intended Audience

This document is intended for engineers, scientists, technicians, or 
others responsible for programming and/or using the DT3155 board 
to perform machine vision and/or image analysis operations. It is 
assumed that you have some familiarity with imaging principles and 
that you are familiar with the operating characteristics of your video 
source.

If you are writing application programs using the device driver and 
the Frame Grabber SDK, it is also assumed that you are familiar with 
the Microsoft

 Windows

 98, Windows Me (Millennium Edition), 

Windows 2000, or Windows XP operating system and with the 
Microsoft C compiler.

What You Should Learn from this Manual

This manual provides detailed information about the features of the 
DT3155 board and the DT3155 Device Driver to allow you to access 
the board’s capabilities using software. It is organized as follows:

•

Chapter 1

, 

“Overview,” 

describes the major features of the board, 

as well as the supported software and accessories for the board.

•

Chapter 2

, 

“Principles of Operation,” 

describes all of the board’s 

features and how to use them in your application.

•

Chapter 3

, 

“Supported Device Driver Capabilities,” 

describes the 

capabilities supported by the DT3155 Device Driver and the 
initialized control values.

Summary of Contents for DT3155











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands