About this Manual
viii
Conventions Used in this Manual
The following conventions are used in this manual:
• Notes provide useful information that requires special emphasis,
cautions provide information to help you avoid losing data or
damaging your equipment, and warnings provide information to
help you avoid catastrophic damage to yourself or your
equipment.
• Items that you select or type are shown in
bold
.
•
Courier
font
is used to represent source code.
Related Information
Refer to the following documents for more information on using the
DT3145 board:
•
DT3145 Getting Started Manual
(UM-19601). This manual
(GS3145.PDF), included on the Imaging OMNI CD
, describes
how to set up, install, and wire signals to the DT3145 board, how
to configure the DT3145 Device Driver, how to verify the
operation of the board, and how to troubleshoot issues with the
DT3145 board should they occur.
•
DT-Active Frame Grabber Controls Getting Started Manual
(UM-19336). This manual (DTFG.PDF), included on the Imaging
OMNI CD, describes how to install, set up, and use the DT-Active
Frame Grabber controls (including the DT-Active Camera Link
Frame Grabber control) to develop imaging or machine vision
application programs using Microsoft
Visual Basic
or
Microsoft Visual C++
.
•
GLOBAL LAB Image/2 User’s Manual
(UM-17790). This manual
(GLIUM.PDF), included on the Imaging OMNI CD, describes
how to use GLOBAL LAB® Image/2 to create scientific
applications.
Summary of Contents for DT3145
