Connecting Signals
25
4
4
4
4
4
4
4
4
4
Connecting Video Signals to the Board
You can connect monochrome or composite color video signals to the
board in one of two ways:
•
Using the EP311 cable
−
Use this cable if you want to connect a
maximum of three simultaneous inputs (corresponding to the
first channel of each device) to a DT3130 Series board. For
example, if you have a DT3131 board, which has one frame
grabber device on it, the EP311 cable allows you to connect one
monochrome/composite input (VID0) to the board. If you have a
DT3133 board, which has three frame grabber devices on it, the
EP311 cable allows you to connect one monochrome/composite
input (VID0) to device 1, one monochrome/composite input
(VID3) to device 2, and one monochrome/composite input
(VID6) to device 3.
•
Using the EP314 cable
−
Use this cable if you want to connect up
to nine multiplexed inputs to a DT3130 Series board. For
example, if you have a DT3131 board, which has one frame
grabber device on it, the EP314 cable allows you to connect three
monochrome/composite inputs (VID0 to VID2) to the board. If
you have a DT3133 board, which has three frame grabber devices
on it, the EP314 cable allows you to connect three
monochrome/composite inputs (VID0 to VID2) to device 1, three
monochrome/composite inputs (VID3 to VID5) to device 2, and
three monochrome/composite inputs (VID6 to VID8) to device 3.
If you want to connect an S-video signal to a DT3130 Series board, use
the EP317 cable.
The following sections describe these connection methods.
Summary of Contents for DT3130 Series
