Chapter 5
34
Synchronously Acquiring a Single Frame to
Memory
To synchronously acquire a single frame to memory, perform the
following steps:
1.
If you are using a composite video input signal, connect the video
input signal to connector J2. If you are using an S-video (Y/C)
input, connect the video input signal to connector J3.
2.
From the DT-Acquire main menu, click
Setup
, then click
Select
Device
.
3.
Select the alias that you gave to the DT3120 board when you
configured the device driver, then click
OK
. To get started, select
device
−
1.
4.
Leave the remainder of the settings under
Setup
at their default
values.
5.
From the DT-Acquire main menu, click
Run
, then
Single Frame
Acquire!
.
A single frame is acquired (synchronously) and displayed on the screen.
6.
To acquire another frame, repeat step 5.
7.
If you wish, modify the parameters available for the DT3120
board by clicking the desired parameter under
Setup
and
changing the associated values, then repeat step 5.
8.
If you want to save the graphic, click
File
from the
DT-Acquire main menu, then click
Save Graphic File
.
9.
When you are finished with this utility, from the DT-Acquire
main menu, click
Setup
, then click
Close Device
.
10.
Close the application.
Summary of Contents for DT3120
