Data Translation 18729 User Manual Download Page 112

Page: 112 / 128

Modifying the Device Driver

Select the DT3120 board to configure.

10.

Select the

Video Format

as either 50 Hz or 60 Hz.

11.

When you are finished, click

Done

If you made any changes, the Save Changes dialog box appears.

12.

If you want to save your changes, click

Yes

Modifying a Board in the Device Driver
Configuration

To modify a board in the device driver configuration, perform the
following steps:

Open the Control Panel.

Double-click the

DT Imaging Control

icon.

Select the DT3120 board to configure.

Select the

Video Format

as either 50 Hz or 60 Hz.

When you are finished, click

Done

If you made any changes, the Save Changes dialog box appears.

If you want to save your changes, click

Yes

Summary of Contents for 18729

































































































































Search results

Summary of Contents for 18729

Reviews:

Related manuals for 18729

Brands by name

Popular brands

Data Translation 18729, User Manual

Search results

Summary of Contents for 18729

Reviews:

Related manuals for 18729

Brands by name

Popular brands