Data Modul ENX-PNV User Manual Download

Page: 51 / 59

User’s Manual

ENX-PNV

2.2.3.6 Hardware Health Configuration

You can use this screen for the Hardware Health status. See below.

CPU Temperature [xxxºC/xxxºF]

The onboard hardware monitor automatically detects and displays the CPU temperature.

CHASIS Temperature [xxxºC/xxxºF]

The onboard hardware monitor automatically detects and displays the Chassis

temperature.

CPU Fan Speed [xxxxRPM]

The onboard hardware monitor automatically detects and displays the CPU fan speed in

rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows

N/A.

+12VIN / +5VIN / Vcore / VCC / VBAT [xxxx Voltage]

The onboard hardware monitor automatically detects the voltage output through the

onboard voltage regulators.

Data Modul AG - www.data-modul.com

Summary of Contents for ENX-PNV




























































Search results

Summary of Contents for ENX-PNV

Reviews:

Related manuals for ENX-PNV

Brands by name

Popular brands

Data Modul ENX-PNV, User Manual

Search results

Summary of Contents for ENX-PNV

Reviews:

Related manuals for ENX-PNV

Brands by name

Popular brands