Data Modul AG AIMB-258 Page 54 User Manual Download | Manualshive

Page: 54 / 84

background image

AIMB-258 User Manual

46

3.1

Before you Begin

To facilitate the installation of the enhanced display device drivers and utility soft-
ware, you should read the instructions in this chapter carefully before you begin. The
device drivers for the AIMB-258 board are located on the software installation CD.
The auto-run function of the driver CD will guide you to the utilities and device drivers
required for a Windows system. The Intel

®

Chipset Software Installation Utility is not

required on any systems running Windows NT 4.0. Updates are provided via Service
Packs from Microsoft

®

.

Before you begin, it is important to note that most display drivers need to have the
relevant software application already installed in the system prior to installing the
enhanced display drivers. In addition, many of the installation procedures assume
that you are familiar with both the relevant software applications and operating sys-
tem commands. Review the relevant operating system commands and the pertinent
sections of your application software's user's manual before performing the installa-
tion.

3.2

Introduction

The Intel

®

Chipset Software Installation utility installs to the target system the Win-

dows INF files that outline to the operating system how the chipset components will
be configured. This is needed for the proper functioning of the following features:

!

Core PCI and ISA PnP services

!

IDE Ultra ATA 100/66/33 and Serial ATA interface support

!

USB 1.1/2.0 support

!

Identification of Intel® chipset components in the Device Manager

!

Integrates superior video features. These include filtered sealing of 720 pixel
DVD content, and MPEG-2 motion compensation for software DVD

Note!

The files on the software installation CD are compressed. Do not
attempt to install the drivers by copying the files manually. You must use
the supplied SETUP program to install the drivers

Note!

This utility is used for the following versions of Windows system, and it
has to be installed before installing all the other drivers:
Windows XP
Windows Vista

«
...
52
53
54
55
56
...
»

Summary of Contents for AIMB-258





















































































Reviews:

No comments

Related manuals for AIMB-258

Brand: Rabbit Pages: 144

Brand: Garz Fricke Pages: 35

Brand: Texas Instruments Pages: 30

Brand: JETWAY Pages: 48

Brand: Honda Pages: 692

Brand: MSI Pages: 104

Brand: Analog Devices Pages: 8

PROTO1 Xplained Pro

Brand: Atmel Pages: 17

25 Jet FourStroke

Brand: Mercury Pages: 110

Brand: 96Boards Pages: 22

Brand: C-Control Pages: 8

Brand: ASROCK Pages: 83

Brand: DFI Pages: 92

Brand: Abit Pages: 84

Brand: LAPIS Semiconductor Pages: 29

Brand: Transcend Pages: 51

Brand: Transcend Pages: 51

Brand: Asus Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands