manualshive.com logo in svg

Data Modul AG AIMB-258, User Manual

Share
Download
Data Modul AG AIMB-258 User Manual Download Page 47

39

AIMB-258 User Manual

Chapter 2

B

IOS Operation

!

Onboard Serial port 1 [3F8 / IRQ4]

This item allows user to adjust serial port 1 address and IRQ.

!

Onboard Serial port 2 [2F8 / IRQ3]

This item allows user to adjust serial port 2 address and IRQ.

!

Onboard Serial port 3 [3E8 / IRQ4]

This item allows user to adjust serial port 3 address and IRQ.

!

Onboard Serial port 4 [2E8 / IRQ3]

This item allows user to adjust serial port 4 address and IRQ.

!

Onboard Serial port 5 [4F8 / IRQ5]

This item allows user to adjust serial port 5 address and IRQ.

!

Onboard Serial port 6 [4E8 / IRQ7]

This item allows user to adjust serial port 6 address and IRQ.

2.2.6

USE Device Setting

!

USB 1.0 Controller

Select “Enabled” if your system contains a Universal Serial Bus (USB) controller
and you have USB peripherals. The choices are "Enabled" and "Disabled".

!

USB 2.0 Controller

This entry is used to disable/enable the USB 2.0 controller only. The BIOS itself
may or may not have high-speed USB support. If the BIOS has high speed USB
support built in, the support will automatically turn on when a high speed device
is attached. The choices are "Enabled" or "Disabled".

!

USB Operation Mode

Set the USB 2.0 controller to Hi Speed (480 Mbps) or Full Speed (12 Mbps).

!

USB Keyboard / Mouse Function

Select Enabled. if you plan to use a USB keyboard/Mouse. The choices are
"Enabled" and "Disabled".

!

USB Storage Function

Select "Enabled" if you plan to use an external USB storage device to boot the
system under DOS mode. The choices are "Enabled" and "Disabled".

Summary of Contents for AIMB-258





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands