FLC910E User’s Guide
PN 161-09856-001A
June 2010
Installation
Unpacking the Hardware
•FLC910E OFDM Industrial High-Speed Modem
•120 VAC Wall Transformer (US Power Connector)
•Cat5 Ethernet Cable
•CD with Manual
•Quick Start Guide
•Test Antenna
The equipment was carefully packaged to prevent shipping damage. It should be free from any defect, electrical or me
-
chanical, and in good operating condition. If your package contents are damaged or missing, please contact your place
of purchase immediately.
Hardware Overview
Front Panel
•Power 3 pin Pluggable Terminal Block.
Left to Right (Frame Ground, Power Ground, Power Positive)
•RJ45 Ethernet Connector.
•Reset Button.
Side Panel
•Antenna Connector with Standard Thread SMA Connector.
Top Panel
-LED Indicators:
LED
Indication
Note
Power
Modem Power
Should be on (green) at all times
Status
Loading or Changing
Start-Up
On = Entering Boot Mode
Off = While Finishing Boot Mode
Operating
Slow Blinking = Reset Button Held for ~ 3 Seconds
Fast Blinking = Reset Button Held for > 3 Seconds
Note:
The Status LED will blink while a firmware up
-
grade of reset to factory default occurs and the unit will
reboot automatically
RSSI (5 Levels) Signal Strength
Shows signal strength for
Station Adaptors
and
Wireless
Interbuilding Mode
RF Links
Lan Act
Lan Connection
On = 100BaseT Connection
Off = 10BaseT Connection
Blinking = Lan Activity
Lan (100)
100BaseT Connection
On = 100BaseT Connection
Off = 10BaseT if Lan Act is ON
W-Lan
Wireless Link Status
On = Wireless Connected (But no Activity)
Off = No Wireless Link
Blinking = Wireless Activity (Either Data or Linking)
Summary of Contents for FLC910E
Page 2: ...Notes ...
