Data Industrial
Series 340LW Owner’s
Manual
2
Sensor
LED
Service
Wink
AC L/DC
+
AC C/DC
-
Power Out
Signal -
Shield
Model: 340LW
S/N 340LW-
®
1
3
2
3
2
1
Comm
Mode
L
W
ON ORKS
®
Mode
To ON ORKS
Network
FTT-10A
L
W
®
Service
DIC
Comm
Port
Mattapoisett, MA 02739
Sen
sor
In
pu
t
Te
m
p 1
Te
m
p 2
2.10”
(53.3mm)
3.65”
(92.7mm)
2.95”
(74.9mm)
.88”
(22mm)
.60”
(15mm)
4.5”
4.50”
2.00
”
Side
Top
Sid
e
INSTALLATION
Mechanical installation
The series 340LW transmitter may be surface mounted
onto a panel, attached to DIN rails using adapter clips or
wall mounted using two optional enclosures.
Location
Although the 340LW device is encapsulated, all wiring
connections are made to exposed terminals. The unit
should be protected from weather and moisture in
accordance with electrical codes and standard trade
practices.
In any mounting arrangement, the primary concerns are
ease of wiring and attachment of the programming
cable.
The unit generates very little heat so no consideration
need be given to cooling or ventilation.
Surface Mount Installation
The 340LW may be mounted to the surface of any panel using double-
sided adhesive tape or by attaching fasteners through the holes in the
mounting flanges of the unit.
Din rail Mounting
Optional clips snap onto the mounting flanges allowing the 340LW to be
attached to DIN 15, 32, 35 mm DIN rail systems.
Wall Mounting
Optional metal and plastic enclosures are available to mount
the 340LW to a wall when no other enclosure is used. The
enclosure is first attached to the wall using fasteners through
its mounting holes.
After wiring, the transmitter may be attached to the enclosure
with the terminal headers facing in using the slots in the mount-
ing flanges. As an alternate mounting arrangement, the 340LW
may be fastened to the box cover using double-sided adhesive
tape.
Series 340LW Dimensions
340LW Metal Box Dimensions
4.60”
4.60”
2.25
”
Side
Top
Sid
e
3.25”
5.125”
340LW Plastic Box
Dimensions
