2 … Periodic Maintenance
Monthly or Quarterly
—15—
Monthly or Quarterly Main-
tenance
•
•
Cleaning the Cover and Work Surface
•
Calibrating Probe-Offset
Recalibrating the offset of the probes includes
the Z-Offset (the height difference between the
two probes). Do this procedure each month and:
•
after replacing probe tips
•
after any repair on the PNP Head or probes
•
if you are experiencing problems picking
devices, especially with probe two.
To recalibrate the offset, see the on-screen Help
for the
Diagnostics –Alignment
Window.
NOTE: Recalibration takes 5 to 7 minutes to
complete, a Calibration Tool, a 4 mm hex key
(Allen wrench), and a PIN (Personal Identi-
fication Number) to access the Diagnostics
Windows (after tapping the Tools button).
Figure 6—The FLX programmer calibration tool is
Part Number 615-7054
(and came with your 2009
or later FLX500)
.
Summary of Contents for FLX500
