Data Harvest The FlowGo, Instructions Manual

Page: 8 / 21

The FlowGo Interface DO96 (4)
Using FlowGo after the initial set-up
•
Connect FlowGo to the power supply. The green LED should stay continuously lit.
Note:
If th e green LED flashes, press the GO button once so it is lit solidly.
•
Connect FlowGo to the computer using the USB cable.
•
Start the
Go
software.
•
Click on the Connect icon to establish connection to FlowGo.
When a connection is established the icon will alter to Disconnect
(which is used to break off connection with the interface).
Simulation
Control programs can be created and modified in
Go
without the FlowGo interface
attached. This is referred to as ‘operating in simulate mode’.
To simulate FlowGo: -
1.
FlowGo
should still be set as the interface (from
Interface
in the
File
menu) so
the correct number of outputs, inputs and the relevant commands that operate
with FlowGo will be made available.
2. If you want to limit the features to those that will work with FlowGo disconnected
from the computer, select
Limit to Download
from the Settings menu.
3. Do
not
select the Connect icon.
4. Create your control program.
An on-screen representation of the FlowGo interface is available as an ACE. Select
the Connect ACE icon and choose (01) FlowGo from the ACE Interfaces
folder.
©
Data Harvest Group Ltd. Page 8