The FlowGo Interface
DO96 (4)
Using Outputs and Inputs
Connecting components
The output and digital inputs sockets on FlowGo are
4 mm
in diameter.
Methods of connecting electrical components include:
1. Using a pair of 4 mm plugs fixed to PVC
covered wire cable, which is then
attached to the electrical component.
Note:
4 mm plugs are often referred to as
Banana or Stackable plugs and can have
either a solder or screw connection.
2. Spring Connectors – the base of a spring
connector is a 4 mm plug, the top part is a spring
that is pushed back to trap the bare wires
connected to the electrical component.
4 mm plugs
PVC covered
wires
Bare wires to connect to an
electrical component
Connection lead
(Order no. 3667)
Spring Connector
(Order no. CK6)
3. Using ready-made models, ready-wired to 4 mm plugs:
Model pack two – product no. 3608
©
Data Harvest Group Ltd.
Page 10
Summary of Contents for The FlowGo
Page 1: ...The FlowGo Interface ...
