Data General AViiON 5500 Series, Installing, Expanding, And Maintaining

Page: 55 / 192

Connecting the computer unit power cord
2-19
014–002250–01
Connecting the computer unit power cord
After you have assembled your computer system, use these steps to
connect the computer unit power cord to an ac outlet, completing
your set up procedures. Reverse the order of these steps to
disconnect the computer unit power cord.
1. Locate the computer unit power cord. It shipped with the computer
unit.
Refer to Table 1–3 in Chapter 1 to be sure you are using a cord with
proper voltage for your site.
2. Plug the female end of the computer unit power cord into the upper
ac connector, as shown in Figure 2–14.
Computer Unit Rear Panel
Figure 2–14 Connecting the computer unit power cord
3. Plug the male end of the computer unit power cord into a grounded
ac outlet.