page 16
TrafficXRoads: Guide
The camera video source stream address and optional OnVIF source address are
formatted in the following way:
●
Video source:
rtsp://user:password@ip:port/path/file
●
OnVIF source:
user:password@ip
The required information is camera specific and can be usually found in the camera user
manual or at the web interface of the IP camera. The camera must be network accessible
from the unit.
After you have filled out the dialog window and you click on the
Create
button the camera
stream will be registered. The unit will then keep trying to establish connection with the
camera. If the stream is opened, you will see a live preview image in the status panel of
the camera and the status will change to
Running
. If the stream does not open, the status
panel will signal an error in connection with the camera.
Unable to establish connection with the camera? Check whether the
camera is network accessible from the unit. Also make sure that that
the entered RTSP address is correct.
You can connect the other camera streams that you want to analyze with the particular
TrafficXRoads unit the same way.
Maximum number of camera streams
The unit is capable to process a certain number of FPS based on the provided/selected
video analytics engine.
