TrafficXRoads: Guide
page 11
System settings
After a successful login to the web console, the first tab that you see is the
System
tab.
On this tab, you can change the name of the unit, do a reboot, backup settings of the web
console or restore them if needed. It is possible to do “factory reset” here and restore the
web console settings into the default state (including default IP address, names and
passwords).
Network settings
The set-up of the Ethernet interfaces is done in the
Network
tab. The unit has two physical
Ethernet interfaces but both of them are under the same address (address bonding). In
the web interface, the Ethernet interface is under the name
bond0
. In the top part of the
tab you can see the chosen interface and its current state – whether the interface is
enabled in the system and whether it is connected.
For the Ethernet Interface you can enable/disable the loading of IP address from the DHCP
server and set up individual static IP addresses (up to 4) and DNS servers (up to 3).
We recommend using static IP addresses in real world deployments.
