Example:
AT&TST9
ENTER TEST MODE 9
EXIT TEST MODE
TEST STATUS: OK
RX LEVEL: -5dBm
ELAPSED SEC: 00000175
BIT COUNT: 00033704
ERROR COUNT: 00000000
LOOPBACK MODE
– This feature enable loopback at digital interface when SET switch at
the front panel is pressed. This state is indicated by slow PWR led blink (1sec / 1sec cycle).
Modem performs the same task as it have received remote loopback pattern. Modem turns
carrier on at transmit port and expect carrier at receive port. If there is carrier signal present at
receive port modem remain in loopback mode as long as carrier exists. To exit from this mode
unconditionaly just press RST switch at the front panel.
IG202T-R38 User Manual v1.3
, Rev. date: 16 November, 2009
16
