Dashmate DSH-410, User Manual

Page: 15 / 28

15 14
the regular loop footage. To set the G-Sensor follow the
directions below
• Use the MODE button to make sure you are in VIDEO
mode (Video camera icon will be displayed in the top
left corner of the screen).
• Ensure you are not currently recording. If the red circle
record indicator is flashing at the top left of the DSH-
410’s screen, push the OK button to stop recording.
• Push the MENU button taking you to the VIDEO menu.
• Use the DOWN button to highlight the setting named
G-Sensor and push OK.
• Using the UP and DOWN button, highlight the required
sensitivity of the G-Sensor (2G is the most sensitive
setting only requiring small bumps to log footage as
Locked, and 8G is the least sensitive requiring a larger
amount of activity to log footage as Locked).
• To confirm selection push the OK button, the DSH-410
will take you back to the VIDEO menu.