Dash ZEFON BIO-PUMP Instructions Download Page 3

Page: 3 / 4

www.dashequipmenthire.com.au | [email protected] | 1300 092 647 | ABN-12 122 126 126

Step 4

Turn on the BIO-PUMP by gently pressing

the “Power” button. Press the quick sample

button a few times until you have selected

the “quick sample 5 minute” option (from

the default position, this would be three

times). Once selected, press the “START

STOP” button. The test will take 5 minutes to

complete.

Step 3

Remove the seal from the top and bottom of the

cartridge

(

save to reseal

later) and slot the

bottom side of the

cartridge

into the circular slot under the BIO-PUMP plus label. Ensure

that you are placing the

cartridge

the right way up. You can do this, but making sure the air

flow direction arrow is facing downwards, towards the pump.

ZEFON BIO-PUMP

Summary of Contents for ZEFON BIO-PUMP

Page 1: ...te test results pleaseclose doors andwindows priorto sampling preferably 24hours before Outside air may contain high levels of mould spores and could affect your results if direct airflow from outside...

Page 2: ...a any height from 1 0m to 1 5m off the ground e g on a table bench If the batteries are low plug in the AC charger whilst testing Alternatively leave the unit t o charge for an hour Step 2 Take a cart...

Page 3: ...position this would be three times Once selected press the START STOP button The test will take 5 minutes to complete Step 3 Remove the seal from the top and bottom of the cartridge save to reseal la...

Page 4: ...cartridge Place the cartridge back into the box Step 6 Repeat STEPS 1 5 if you need to take more tests Once all tests are completed book your lab test and record the receipt number on the Chain of Cus...