Dash DEG200, Instruction Manual

Page: 11 / 32

∙ 11 ∙
5.
Plug the Control Probe into the Control Probe Socket located on the Base of the
griddle. Be sure to properly align the connector’s single prong with the middle
hole before pushing the Control Probe in. Then, plug the griddle into an outlet.
(Photo C)
6.
Turn the Temperature Control Dial clockwise to Low. It is recommended that you do
not begin cooking on a high temperature as this may cause food to splatter or even
burn when placed on the non-stick Cooking Surface. (Photo D)
7.
Put your ingredients onto the Cooking Surface. Allow to cook for several minutes.
Increase the heat until you reach the temperature appropriate for your recipe.
8.
When you are finished cooking, turn the Temperature Control Dial to Off. Wait for
the griddle to cool before cleaning.
C D
setting up YOUR everyday griddle