Install/Uninstall
Installation
1. Attach the device to the bracket. Screw the bracket into the device tripod socket.
Ensure that it is screwed in tightly.
2. Place the device in an appropriate place on the windshield, so as not to obstruct
the driver’s view.
3. Attach the bracket to the windshield. Push down on the suction cup of the bracket
and use the side pump to pump out any excess air ensuring a tight seal.
4. Adjust the angle.
5. Connect to the car charger.
4
1
3
5
1
5
Air Safety Bag Warning
Do not put the device within any deployment areas of air safety bags. Our company is
not responsible for any damage or injuries caused by air safety bag.
Mount the device around the area of the rear view mirror, to optimize viewing angle
Ensure the camera is mounted within an area covered by windshield wipers, enhancing
video clarity when it is raining.
Uninstallation
1. To remove the bracket simply pull up the side pump.
2. Peel the suction cup off at one of the sides.
Ensure no dust is on the windscreen before mounting.