Dascom Tally T2150S, Quick Start Manual

Page: 8 / 104

Installation Quick start guide
4
`
Installing the cut device
Make sure that the printer is switched off before beginning to install the cut device.
Insert the cut device in such a way that the pin
c
on the right
side slides into the corresponding recess
d
.
Move down the left side of the cut device, so that the pin
e
on the left side slides downwards into the slot
f
as far as it
will go.
The pin
e
must be completeley at the bottom of the
slot
f
.
STOP
d
c
f
e
STOP
Cutter-en.book Seite 4 Donnerstag, 3. Mai 2007 9:42 09