background image

2.4GHz FHHS DIGITAL Transmitter/Receiver   

MODEL: DA911W                 

                    USA VERSION

 

                                                                                DASAN Electron

 

contact during charging. 

The charging contacts may need to be cleaned with an alcohol-moistened cloth. 

The Ni-MH battery pack may need to be discharged first before a full charge. 

 

 

Range is limited 

 

Raise or reposition the antenna on the docking station. 

 

 

Sign received flutters or 

fades 

 

The transmitter rechargeable Li-ion battery pack may need charging. 

You may be out of normal operating range. Move closer to the docking station. 

 

 

 

FCC NOTICE 

 

 

This DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. 

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS   

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND   

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING 

INTERFERENCE THAT MAY CAUSE UNDERSIRED PERATION. 

 

 

 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of 

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, my cause harmful interference to radio communication. However, there is no 

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following measures: 

 

-

 

Reorient or relocate the receiving antenna. 

-

 

Increase the separation between the equipment and receiver. 

-

 

Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. 

-

 

Consult the dealer of an experienced radio/TV technician for help. 

 

NOTE

 : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to 

this equipment. Such modifications could void the user’s authority to operate the equipment. 

 

 

 

Summary of Contents for DA911WH








Reviews: