15
Hills – VoiceNav Lite User Manual V1.1
3. Battery Test
The backup battery is housed within your security systems main control box and
provides power when mains power has been interrupted. Prolonged operation
using only the backup battery will result in total system failure, so the condition of
the battery is critical to sustain the power required for the longest period of time.
It is recommended to change your battery at periodical intervals, please refer to
your service provider for further information. This feature is used to test the
condition of your back up battery.
4. Zone Walk Test
Zone Walk test is used to test the connectivity between your alarm devices IE:
movement sensors, door contacts etc, and your security system. When in walk
test mode your VoiceNav will emit the chime “beep” each time a zone is
activated, and chirp the outside siren. Area Lights will also blink red after a
detection device in that area has been activated. You must exit Walk Test mode
when you are satisfied all the zones function correctly. Your communicator will
not function during this test.
0. System Version number
This menu is a service tool for your system provider
Perform a siren test
Step
1. [
MENU
] - [
4
] Selects main menu - System Test
2. [
?
]-[
?
]-[
?
]-[
?
]
Enter your master PIN code
3. [1]
Selects the siren testing. External and internal sirens will
sound.
4. [
AWAY
]
To stop sirens (Within 30 seconds)
5. [
MENU
]
Moves back to system test menu (step 3)
6. [
MENU
]
Moves back to main menu
7. [
MENU
]
Exits main menu
