5
INTEGRAL-WPM1 Manual
INTEGRAL
Rear panel
A
B
C
D
Audio Output Connector and Vdc in. The 6 pin
Euroblock type connector is used to connect the
analog audio cables and the Vdc voltage from the
external power supply. Pin assignments:
1
V+ from the power supply
2
V- from the power supply
3
OUT + , Audio Signal, Pin 2 of an XLR connector
4
OUT- , Audio Signal, Pin 3 of an XLR connector
5
not used
6
Earth
Link Jumper: used to connect EARTH and V- of the
Power Supply. Normally has to be connected to avoid
noise or hum.
PHT Jumper: When inserted the Phantom power will
be available at the XLR connector
TKO Jumper: Remove it to activate Talk Over
functionality of the Microphone´s signal over the line
signal
C
A
D
B
1
2
3
4
5
6
