DAS AUDIO INTEGRAL-VC1, User Manual

Page: 8 / 10

8
INTEGRAL-VC1 Manual
INTEGRAL
Installation
With each unit an electrical 86 x 86 mm box is included.
Contact a professional installer or authorized dealer for
the mounting process.
• Cut a squared hole in the wall to place the electrical
box.
• Place the electrical box and fix it to the wall. Previously
all cabling has been installed in the wall with sufficient
length to provide proper stress relief. Use flexible
cables.
• Run the cables out of the wall thru the electrical box.
• Connect the cables to the screw connector located
at the back plate of the VC1 following the pin out
previously described.
• Fix the unit it to the electrical box with the provided
M4x25 screws.