44
INTEGRAL-M88 Manual
INTEGRAL
ALMA control
Two additional configurable parameters, Bridge mode (ONLY
AVAILABLE ON MA MODELS) and Amp Bridge, are also available
from the Settings tab. Bridge mode is used with systems with
transformers (100 / 70V) or to double the output power of the am-
plifier.
Note that the physical output pins employed when using the am-
plifier in Bridge mode are different from those used when config-
uring the amplifier in stereo mode.
In the Settings tab, you can also configure the DANTE digital out-
put channels and select the output channels that the device will
send to the network. The DANTE 1, DANTE 2, DANTE 3 and DANTE
4 channels can be a copy of any of the analog inputs IN A, IN B, IN
C, IN D or any of the eight output channels OUTPUT 1, 2, 3,…..,8. This
way, the audio injected into the network from a M88 device can
be processed. In the following example, the DANTE 1,2,3,4 chan-
nels are copies of the input channels A, B, C and D (a D will appear
on the input or output channel that has been assigned):
In addition to the previously mentioned options, from the Settings
tab, the user can also enable and disable the phantom power supply
of the analog input channels IN A, IN B (PH will appear on the chan-
nel with active phantom):
Summary of Contents for 10721170
Page 1: ...INTEGRAL M88 Users manual www dasaudio com ...
Page 45: ......
