a) SOS button: By pressing the SOS key (button 2) for 3
seconds will initiate the alert state. The word SOS will be
displayed on the screen and the smartwatch will call the
3 SOS phone numbers alternatively in 2 rounds until one
of them answers. Meanwhile the watch will also send a
message to the number that monitors the watch
b) Low power alert: The smartwatches battery appears in
percentage. When it reaches 20% and lower, it will send an
alerting message to the number that monitors the watch.
c) Voice chat: Click the talk, then you can chat with the APP.
d) Turn Off: Press the “OFF” key to power off the watch
without the SIM card, or remote turn off via the APP.
e) Phone Book: The phone number can be used to make
voice calls. Find the phone book function in the APP, click
to enter, and then select the phone number to call. The
phone book can save up to 10 numbers.
6. Troubleshooting
a) Assume the watch can not be connected with the server
and the device shows no connection with the network. Please
follow the next steps:
• Please check whether the watch’s NANO SIM card is GSM
support
• Check whether you have inserted the NANO SIM card
correctly and the screen play is normal (please refer to the
picture’s instructions)
• Please check whether the IP, Port and ID numbers are correct.
You should make sure that the ID number on the watch is the
same as the ID number of the device itself. Also the user can
check the ID number of the device itself by sending the mes-
sage “pw,123456,ts#” from their cellphone to the watch (the
smartwatch must have a NANO SIM card inserted and powered
Summary of Contents for SB54
Page 1: ...User Manual SG53 SB54 ...
